Avalanche 2500 4WD V8-8.1L VIN G (2003)
4. Remove the bulb and base assembly by turning the bulb 1/2 turn counter clockwise and pulling outward.
5. Remove the bulb from the base by pulling outward.
INSTALLATION PROCEDURE
IMPORTANT: This procedure calls for the replacement of incandescent bulbs only. The light emitting diodes (LEDs) are not replaceable
individually. If LED replacement is needed, send the cluster to an AC Delco Service Center. Refer to Instrument Panel Cluster (IPC) Replacement.
1. Install the bulb to the base.
2. Install the bulb into the cluster by inserting the bulb and base assembly and turning the bulb 1/2 turn clockwise.