Avalanche 2500 4WD V8-8.1L VIN G (2003)
Fuel Level Sensor: Service and Repair
Fuel Level Sensor Replacement (2500 Series - Rear Tank)
REMOVAL PROCEDURE
1. Remove the sending unit.
2. Disconnect the fuel level sensor electrical connector.
3. Remove the fuel level sensor retaining clip.
4. Squeeze the locking tangs and remove the fuel level sensor (4).
INSTALLATION PROCEDURE
1. Install the fuel level sensor (4).
2. Connect the fuel level sensor electrical connector.
3. Install the fuel level sensor retaining clip.
4. Install the sending unit.
