Avalanche 2500 4WD V8-8.1L VIN G (2003)
Air Filter Element: Service and Repair
AIR CLEANER ELEMENT REPLACEMENT
REMOVAL PROCEDURE
1. Remove the intake air resonator.
2. Disconnect the mass air flow/intake air temperature (MAF/IAT) sensor electrical connector (3).
3. Loosen the air cleaner housing cover screws.
4. Remove the air cleaner housing cover.
5. Remove the air filter element.
6. Inspect the air filter element for the following:
-
Dust
-
Dirt
-
Water
7. Clean or replace the air filter element as required.
INSTALLATION PROCEDURE