Avalanche 2500 4WD V8-8.1L VIN G (2003)
Power Seat Switch: Service and Repair
Memory Seat Switch Replacement
MEMORY SEAT SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Remove the front door trim panel.
2. Disconnect the electrical connector.
3. Release the front seat memory switch assembly retaining clips in order to remove the switch.
4. Remove the front seat memory switch assembly.
INSTALLATION PROCEDURE
1. Install the front seat memory switch assembly to the front trim panel by pressing into place until fully seated.
2. Connect the electrical connector to the front seat memory switch assembly.
3. Install the front trim panel.
