Avalanche 2500 4WD V8-8.1L VIN G (2003)
1. Install the O-ring seal (3) onto the VSS (1).
2. Coat the O-ring seal (3) with a thin film of transmission fluid.
3. Install the VSS (1).
Notice:
Refer to Fastener Notice in Service Precautions.
4. Install the VSS bolt (2).
-
Tighten the bolt to 11 Nm (97 inch lbs.).
5. Connect the VSS electrical connector (2).
6. Lower the vehicle.
7. Refill the fluid as required.
