Avalanche 2500 4WD V8-8.1L VIN G (2003)
5. Install the bolts (1) to the rear of the power steering pump.
Tighten
Tighten the rear bolts to 50 N.m (37 lb ft).
6. Install the power steering pump mounting bracket bolts.
Tighten
Tighten the mounting bracket bolts to 50 N.m (37 lb ft).
7. Install the bolts (2) to the front of the pump.
Tighten
Tighten the power steering pump retaining bolts to 50 N.m (37 lb ft).
8. Install the filler neck to the power steering pump.
9. Install the nut (1) and clamp (3) retaining the filler neck to the power steering pump.
Tighten
Tighten the filler neck retaining nut to 25 N.m (18 lb ft).
10. Fill and bleed the power steering system. Refer to Bleeding the Power Steering System.