Avalanche 2500 4WD V8-8.1L VIN G (2003)
Tighten
Tighten the nut to 50 N.m (37 lb ft).
8. Install the retaining bolts for the brake hose and wheel speed sensor brackets.
Tighten
Tighten the bolts to 9 N.m (80 lb in).
9. Connect the ESC link rod to the sensor, if equipped.
10. Install the tire and wheel.
11. Remove the safety stands.
12. Lower the vehicle.
13. Verify the wheel alignment.
Lower Control Arm Replacement
LOWER CONTROL ARM REPLACEMENT
TOOLS REQUIRED
-
J 43631 Ball Joint Separator
-
J 45851 Ball Joint Separator Protector Adapters
REMOVAL PROCEDURE
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Support the lower control arm with a safety stand.
3. Remove the tire and wheel.
4. Remove the stabilizer shaft links from the lower control arm.
5. Remove the shock absorber lower nut and the bolt.
6. Remove the torsion bars.
7. Remove the wheel drive shaft.
