Avalanche 2500 4WD V8-8.1L VIN G (2003)
2. Align the shock absorber with the mounting holes in the lower control arm, 15 Series.
3. Align the shock absorber with the mounting holes in the lower control arm, 25/35 Series.
4. Install the shock absorber bolt (2) to the lower control arm.
5. Install the shock absorber nut (3) to the bolt.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the nut to 80 N.m (59 lb ft).
6. Install the upper insulator to the shock absorber.