Avalanche 2500 4WD V8-8.1L VIN G (2003)
Band Apply Servo: Service and Repair
4L80-E/4L85-E
Reverse Servo
4L80-E/4L85-E
Reverse Servo Replacement
Removal Procedure
1. Remove the transmission filter.
2. Remove the rear servo from the transmission case in the following order:
2.1.
Cover bolts (6)
2.2.
Cover (5)
2.3.
Cover gasket (4)
2.4.
Bottom retaining clip (3)
2.5.
Servo piston (2)
2.6.
Outer ring oil seal (1)
2.7.
Inner ring oil seal (7)
2.8.
Accumulator piston (8)
2.9.
Piston seal (9)
2.10.
Washer (10)
2.11
Servo spring (11)
2.12.
Servo spring retainer (12)
2.13.
Selective pin (13)
2.14.
Accumulator spring (14)
Installation Procedure