chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Rear Axle Shaft Seal and/or Bearing Replacement (8.6 Inch Axle W/O JL4, 9.5 Inch Axle)|Page 11958 > < Rear Axle Shaft Seal and/or Bearing Replacement (8.6 Inch Axle W/O JL4, 9.5 Inch Axle)|Page 11956

Avalanche 2500 4WD V8-8.1L VIN G (2003)

Page 2
background image

3. Install the axle shaft seal using the J21128.
4. Drive the tool into the bore until the axle shaft seal bottoms flush with the tube.
5. Install the axle shaft.
6. Install the rear axle housing cover.
7. Install the tire and wheel assembly. 
8. Fill the rear axle.
9. Lower the vehicle.

Rear Axle Shaft Seal and/or Bearing Replacement (8.6 Inch Axle W/O JL4, 9.5 Inch Axle)|Page 11958 > < Rear Axle Shaft Seal and/or Bearing Replacement (8.6 Inch Axle W/O JL4, 9.5 Inch Axle)|Page 11956