chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Rear Axle Shaft Seal and/or Bearing Replacement (8.6 Inch Axle W/O JL4, 9.5 Inch Axle)|Page 11960 > < Rear Axle Shaft Seal and/or Bearing Replacement (8.6 Inch Axle W/O JL4, 9.5 Inch Axle)|Page 11958

Avalanche 2500 4WD V8-8.1L VIN G (2003)

Page 2
background image

7. Remove the adjusting nut using the J2222-C.

8. Remove the adjusting nut.

9. Remove the hub from the axle housing.

10. Remove the rotor, if necessary.
11. Remove the oil seal from the wheel hub using a suitable seal removal tool.

Rear Axle Shaft Seal and/or Bearing Replacement (8.6 Inch Axle W/O JL4, 9.5 Inch Axle)|Page 11960 > < Rear Axle Shaft Seal and/or Bearing Replacement (8.6 Inch Axle W/O JL4, 9.5 Inch Axle)|Page 11958