Avalanche 2500 4WD V8-8.1L VIN G (2003)
Seals and Gaskets: Service and Repair
Rear Axle Hub, Bearing, Cup, and/or Seal Replacement
Tools Required
^
J8092 Universal Driver Handle - 3/4 inch - 10
^
J2222-C Wheel Bearing Nut Wrench
^
J24426 Wheel Bearing Race Installer - Outer
^
J24427 Wheel Bearing Race Installer - Inner
^
J44419 Hub Outer Bearing Race Installer
^
J44420 Differential Bearing and Hub Seal Installer
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel assembly.
3. Remove the brake caliper.
4. Remove the axle shaft.
5. Remove the axle nut retaining ring.
6. Remove the key.
