Avalanche 2500 4WD V8-8.1L VIN G (2003)
Flex Plate: Service and Repair
Engine Flywheel Replacement
Removal Procedure
1. Remove the transmission.
2. Remove the flywheel bolts.
3. Remove the flywheel.
Installation Procedure
Important: "Engine Side" stamped on the flywheel is to be positioned toward the engine.
1. Install the flywheel.
Notice:
Refer to Fastener Notice in Service Precautions.
See: Automatic Transmission/Transaxle/Service Precautions/Vehicle Damage Warnings/Fastener Notice
2. Install the flywheel bolts.
Tighten the bolts to 100 Nm (74 ft. lbs.).
3. Install the transmission.
