Avalanche 2500 4WD V8-8.1L VIN G (2003)
12. Use J 24402-A , J 39032 , or equivalent in order to remove the window.
IMPORTANT: Keep the cutting edge of the tool against the window in order to properly separate the urethane adhesive from the window.
-
Leave a base of urethane on the pinchweld flange.
-
The only suitable lubrication is clear water.
13. Remove the bottom of the window from the urethane adhesive using a long utility knife or similar tool.
14. With the aid of an assistant (2) remove the window (1) from the vehicle.
INSTALLATION PROCEDURE
1. Install a stationary window into the opening.
