Avalanche 4WD V8-5.3L (2011)
8. Connect the brake master cylinder primary brake pipe fitting (1) and tighten to 30 Nm (22 lb ft).
9. Connect the brake master cylinder reservoir return hose quick connect (1).
10. Connect the brake master cylinder reservoir supply hose quick connect (2).
11. Connect the brake fluid level sensor electrical connector.
12. Fill the brake master cylinder reservoir. Refer to Master Cylinder Reservoir Filling See: Procedures/Master Cylinder Reservoir Filling.
13. Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding .
Brake Master Cylinder Adapter Replacement
Brake Master Cylinder Adapter Replacement
Removal Procedure
1. Place the transmission in the PARK or NEUTRAL position.
2. Apply the park brake.
