Avalanche 4WD V8-5.3L (2011)
Parking Brake Warning Switch: Service and Repair
Parking Brake Indicator Switch Replacement
Removal Procedure
Warning: Refer to Battery Disconnect Warning See: Starting and Charging/Battery/Service Precautions.
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection See: Starting and
Charging/Battery/Battery Cable/Negative/Service and Repair/Battery Negative Cable Disconnection and Connection.
2. Without disconnecting the electrical connectors, remove the left side instrument panel electrical center/junction block and position aside. Refer to
Instrument Panel Electrical Center or Junction Block Replacement - Left Side See: Maintenance/Fuses and Circuit Breakers/Fuse Block/Service
and Repair/Removal and Replacement/Instrument Panel Electrical Center or Junction Block Replacement - Left Side.
3. Disconnect the park brake warning lamp switch electrical connector.
4. Remove the park brake warning lamp switch bolt.
5. Remove the park brake warning lamp switch.
Installation Procedure