Avalanche 4WD V8-5.3L (2011)
5. Ensure the TPA is fully seated. The TPA should be centered and flush with the connector body when viewed.
Molex Connectors
Molex Connectors
Special Tools
*
EL-38125-550 - Terminal Release Tool Kit
*
J-38125-213 - Terminal Release Tool
For equivalent regional tools, refer to Special Tools See: Power and Ground Distribution/Tools and Equipment.
Terminal Removal Procedure
1. Locate the connector position assurance (CPA) on the top of the wire dress cover. Slide the CPA forward.
