Avalanche 4WD V8-5.3L (2011)
17. Position the engine wiring harness (electronic throttle control branch) as necessary.
18. Install the engine wiring harness (electronic throttle control branch) clip (6) to the ignition coil bracket stud.
19. Connect the engine harness electrical connector (1) to the ignition coil wire harness.
20. Install the CPA retainer (2).
21. Install the intake manifold cover. Refer to Upper Intake Manifold Sight Shield Replacement See: Intake Manifold/Service and Repair/Upper
Intake Manifold Sight Shield Replacement.
