Avalanche 4WD V8-5.3L (2011)
Ignition Switch Lock Cylinder: Service and Repair
Ignition Lock Cylinder Case Replacement
Ignition Lock Cylinder Case Replacement
Removal Procedure
Warning: Refer to SIR Warning See: Restraint Systems/Service Precautions/SIR Warning.
1. Remove the inflatable restraint steering wheel module coil. Refer to Steering Wheel Inflatable Restraint Module Coil Replacement See: Restraint
Systems/Air Bag Systems/Clockspring Assembly / Spiral Cable/Service and Repair/Removal and Replacement.
2. Remove the ignition/start switch. Refer to Ignition and Start Switch Replacement See: Service and Repair.
3. Disconnect the park lock cable from the ignition lock cylinder case.
4. Disconnect the passlock and key buzzer from the ignition lock cylinder case.
5. Remove the 3 ignition lock cylinder case screws (2).
6. Remove the ignition lock cylinder case (1) from the vehicle.
Installation Procedure
