Avalanche 4WD V8-5.3L (2011)
3. Connect the wheel speed sensor electrical connector (1).
4. Install the wheel speed sensor electrical connector and sensor harness clips (2) to the inboard frame rail.
5. Perform the Diagnostic System Check - Vehicle See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System
Check - Vehicle.
Non-Hybrid Greater than/Equal to 3900 kg (8600 lb) GVW
Rear Wheel Speed Sensor Replacement
Removal Procedure
Warning: Refer to Brake Dust Warning See: Brakes and Traction Control/Service Precautions/Technician Safety Information/Brake Dust
Warning.
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle See: Maintenance/Vehicle Lifting/Service and Repair.
2. Disconnect the wheel speed sensor electrical connector (1).
