Avalanche 4WD V8-5.3L (2011)
2. Ensure that the transmission manual shaft lever is in the mechanical park position.
3. Align and install the range selector cable (2) to the bracket.
4. Install the retainer (1) that secures the cable to the bracket.
5. Install the range selector cable end to the transmission range selector lever ball stud.
6. Install the cable clip on the transfer case, if equipped.
7. Install the clips on the cable to the floor panel reinforcement.
8. Lower the vehicle and ensure that the steering column shift lever is still in the park position.
9. Install the cable grommet to the floor panel.
