Avalanche 4WD V8-5.3L (2011)
Note
Reuse cover pan bolts. Ensure that the bolts have been cleaned before they are installed. Apply Loctite 272 or equivalent to the threads of the
cover pan bolts.
16. Hand start new cover pan bolts to avoid cross threading and apply a static torque of 40 Nm (30 lb ft) with a pre-set clicker wrench. Make sure the
10 & 12 o'clock clips are in the right position (10 o'clock clip only for SUV vehicles). Apply certification marks on the bolt by putting a slash
through the bolt head and the cover pan.
17. Remove the fill plug using a ratchet with a 3/8" extension and a 1/2" square head.
18. Fill the axle with 2 liters (2.1 quarts) of new oil. Verify the fluid level after filling the oil to be less than 2 cm (0.79 in) below the fill hole.
