Aveo L4-1.6L (2008)
3. Install the screws underneath the fascia.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
4. Install the nuts behind the fascia.
Tighten the front bumper impact beam nuts to 27 N.m (20 lb ft).
5. Install the screws in the wheel wells.
Tighten the front wheel well screws to 1.5 N.m (13 lb in).
6. Install the headlamps, the turn signal lamp, the side turn signal lamps, and the front fog lamps.
Refer to Headlamp Replacement (Notchback) (See: Lighting and Horns/Headlamp/Service and Repair)Headlamp Replacement (Hatchback) (See:
Lighting and Horns/Headlamp/Service and Repair) , Front Side Marker Lamp Replacement (See: Lighting and Horns/Marker Lamp/Service and
Repair) and Front Fog Lamp Replacement (Notchback) (See: Lighting and Horns/Fog/Driving Lamp/Service and Repair/Front Fog Lamp
Replacement (Notchback))Front Fog Lamp Replacement (Hatchback) (See: Lighting and Horns/Fog/Driving Lamp/Service and Repair/Front Fog
Lamp Replacement (Hatchback)).
