Beretta L4-121 2.0L (1987)
Technical Service Bulletin # 87126
Date: 870501
Front Wheelhouse - Wavy/Poor Panel Appearance
Number:
87-126
Section:
10
Date:
MAY, 1987
Subject:
FRONT WHEELHOUSE PANEL APPEARANCE
Model and Year:
1987 BERETTA
TO:
ALL CHEVROLET DEALERS
Customer comments that the wheelhouse liner panel is wavy or has a poor appearance can be repaired by installing a second generation wheelhouse
liner. Vehicles assembled prior to the following breakpoints have first generation wheelhouse liners, some of which may be wavy:
Plant
V.I.N. Breakpoints
Wilmington
100648
Linden
104615
Second generation wheelhouse liners are installed on top of the fender flange, rather than on the bottom. The part number for the second generation
liners are:
Part Numbers
10082293
Left Side
10082294
Right Side
Service Procedure
1.
Remove original wheelhouse panel and discard.
2.
Enlarge the holes where plastic fasteners were used to 17/64" diameter. Prime the drilled holes in the sheet steel with chromate primer. (Plastic
fascia does not need to be primed).