Beretta L4-121 2.0L (1987)
Seat Cushion: Customer Interest
Front Seat Cushion - Inadequate Leg Support
Number:
87-170
Section:
10
Date:
JULY, 1987
Subject:
FRONT SEAT CUSHION LEG SUPPORT
Model and Year: EARLY 1987 BERETTA AND CORSICA
WITH TWO-WAY SEAT ADJUSTER
TO:
ALL CHEVROLET DEALERS
Owners of some early 1987 Beretta/Corsicas with 2-way seat adjusters may comment of inadequate leg (thigh) support.
To repair this condition, a 12.7 mm spacer, P/N 20047408, is to be placed between the front leg of the 2-way seat adjuster on top of the carpet for both
passenger and driver seats. When this spacer is used, a longer bolt, P/N 10082035, is to be used in place of original bolt.
1.
Move seat to rear most position.
2.
Remove front adjuster to floor pan bolt.
3.
Place 12.7 mm spacer, P/N 20047408, between floor pan and adjuster.
4.
Install new bolt, P/N 10082035, through adjuster spacer and into floor pan, torque 30-38 N-m.
Perform procedure on both front seats.
Labor Operation Number:
T1241