Beretta L4-121 2.0L (1987)
Engine Mount: Service and Repair
Fig. 1 Engine front mount
FRONT ENGINE MOUNT
1.
Disconnect battery ground cable.
2.
Remove two upper front engine mount to body bracket attaching bolts.
3.
Remove upper front engine mount to engine bracket attaching bolt.
4.
Raise and support vehicle, then support engine assembly.
5.
Remove inner fender shield.
6.
Remove lower front engine mount to body bracket attaching bolt.
7.
Remove lower front engine mount to engine bracket attaching bolt.
8.
Remove front engine mount.
9.
Reverse procedure to install. Refer to Fig. 1, for torque specifications.
Prior to installing mount attaching bolts, clean all bolts in suitable cleaning solvent and apply Loctite to threads.
