Beretta L4-121 2.0L (1987)
Control Assembly: Service and Repair
LESS A/C
1.
Disconnect battery ground cable.
2.
Remove instrument panel face plate.
3.
Remove 4 screws securing control assembly, then withdraw control.
4.
Disconnect electrical connectors and control cables, then remove control assembly, remove blower switch if nessary.
5.
Reverse procedure to install.
WITH A/C
BERETTA & CORSICA
1.
Disconnect battery ground cable.
2.
Remove radio trim ring, then the four radio attaching screws.
3.
Disconnect electrical and vacuum harness from rear of radio.
4.
Remove four control to radio face plate attaching screws, then the control assembly.
5.
Reverse procedure to install.