Beretta L4-138 2.3L DOHC QUAD 4 (1991)
1.
Prop rear compartment lid in full-open position to keep lid from failing when torque rod(s) (1) is completely disengaged from retaining bracket
(4).
2.
Using tool J-39719 and a 1/2" drive socket extension, remove end of torque rod(s) (1) by rotating end of torque rod out of adjusting notches (3)
and remove torque rod(s).
Install or Connect:
1.
Attach tool J-39719 to torque rod(s) (1) and hinge rear of torque rod on retaining bracket (4) as shown in Figure 1.
2.
Insert end of torque rod(s) (1) to the appropriate adjusting notch (3).
Use applicable labor operation time.