Beretta L4-138 2.3L DOHC QUAD 4 (1991)
Engine Mount: Service and Repair
Fig. 1 Front Engine Mount Assembly. 1990-91 Models
Fig. 2 Engine Support Tool
FRONT MOUNT
Refer to Fig. 1 when performing the following procedure.
1.
Disconnect battery ground cable.
2.
Remove upper retaining nut from mount.
3.
Using engine support tool, Fig. 2, lift engine from mount.
4.
Raise and support vehicle.
5.
Remove two lower retaining nuts from mount.
6.
Lower the vehicle.
7.
Remove the mount.
8.
Remove nut retaining battery cable clip to mount bracket stud. Separate cable clip from stud.
9.
Remove the stud, two retaining bolts, then the mount bracket.
10.
Reverse procedure to install. Refer to specifications for torque values.
