Beretta L4-138 2.3L DOHC QUAD 4 (1991)
Fig. 3 Rear Engine Mount Assembly. 1990-91 Models
REAR MOUNT
Refer to Fig. 3 when performing the following procedure.
1.
Disconnect battery ground cable.
2.
Disconnect vacuum lines and pull vacuum harness through front lift bracket.
3.
Using engine support tool, Fig. 2, lift rear of engine slightly.
4.
Remove lower right splash shield.
5.
Remove nut from engine mount through bolt.
6.
Remove four bracket-to-body retaining bolts, then the bracket and mount assembly.
7.
Remove three mount-to-bracket retaining nuts. Separate bracket from mount.
8.
Reverse procedure to install. Refer to specifications for torque values.
