Beretta L4-138 2.3L DOHC QUAD 4 HO MFI VIN A (1994)
Engine Mount: Service and Repair
Engine Mount Replacement
Fig. 1 Transaxle Mount Replacement
RIGHTHAND
1. Disconnect battery ground cable.
2. Install engine support tool No. J-28467-A, or equivalent, Fig. 1 , then raise engine off mount.
3. Raise and support vehicle, remove right side wheel, then right side splash shield.
4. Remove two front engine mount lower attaching bolts.
5. Lower vehicle, remove nut holding lower mounting bolt.
6. Remove bracket to mount attaching nut, then mount assembly.
7. Reverse procedure to install.