chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Refrigerant > < Receiver Dryer|Locations
Page 1
background image

Receiver Dryer: Service and Repair

RECEIVER DEHYDRATOR - (R/D)

R/D And A/C Line Mounting

TOOL REQUIRED:

^ J 39500 A/C Refrigerant Recovery, Recharging, and Recycling Station.

REMOVE OR DISCONNECT

1. Negative battery cable.
2. Recover refrigerant.
3. Raise vehicle.
4. Right front tire/wheel assembly.
5. Partially remove splash shield.
6. Both lines at receiver dehydrator and discard "0" ring seals.
7. Receiver dehydrator bracket bolts.
8. Receiver dehydrator assembly.
9. Receiver dehydrator from bracket.

INSTALL OR CONNECT

1. Receiver dehydrator to bracket.
2. Receiver dehydrator assembly.
3. Both lines at receiver dehydrator using new "0" ring seals.
4. Receiver dehydrator bracket bolt.
5. Right splash shield.
6. Tire/wheel assembly.
7. Lower vehicle.
8. Negative battery cable.
9. Evacuate and recharge A/C system.

10. Leak test.

Refrigerant > < Receiver Dryer|Locations