Beretta L4-138 2.3L DOHC QUAD 4 HO MFI VIN A (1994)
7.
Place the J 39401 on the ground in the space cleared in step 6, if it has not already been placed there. Refer to Figure 2.
8.
Fill plastic reservoir in fixture with water or sand. This is necessary to provide sufficient stabilization of the fixture during deployment.
9.
Attach the passenger inflator module in the J 39401 Passenger Side SIR Module Deployment Fixture using the Flange/Arm Mounting Method or
Stud Mounting Method as appropriate (most applications will work best with the Flange/Arm Mounting Method). Refer to Figure 3. Inflator
module must be mounted such that the bag will deploy upward. SECURELY HAND-TIGHTEN ALL FASTENERS PRIOR TO DEPLOYMENT
