Beretta L4-138 2.3L DOHC QUAD 4 HO MFI VIN A (1994)
Correction (See Illustration)
The stabilizer may be adjusted inboard or outboard by bending with locking pliers. It may be considered to be adjusted properly when:
1.
There is enough inboard pressure to prevent glass moving outboard, creating gaps of inner belt strip to glass, BUT;
2.
Not so much inboard pressure to increase binding of the regulator arm to the stabilizer.
3.
After necessary adjustment has been completed, lightly coat the outboard surface of the regulator arm and the inboard surface of the stabilizer arm
where they come in contact with Lubriplate GM P/N 1052196 or equivalent.
Parts Information
