Beretta V6-173 2.8L (1989)
Trunk / Liftgate Hinge: Technical Service Bulletins
Tools - Rear Compartment Lid Hinge Torque Rod Service
Number: 93-92-10
Section: 10
Date: JAN. 1993
Corporate Bulletin No.: 231076
ASE No.: B1
Subject:
SERVICE TOOL FOR THE REAR COMPARTMENT LID HINGE TORQUE RODS
Model and Year:
1982-92 CAVALIER
1988-93 CORSICA AND BERETTA
SERVICE UPDATE
APPLICATION:
"J" Series: 1982 - 1992
"L" Series: 1988 - 1993
This is a service manual update to Section 10-8 regarding a service tool developed to assist in adjusting and/or replacing rear compartment lid hinge
torque rods.
Adjust:
When adjusting the tension on torque rods, raise or lower either the right or left torque rod one adjusting notch at a time. It is important to keep the
tension on both torque rods as close as possible. To increase the tension on the rear compartment lid hinge, move the end of the torque rod down a notch.
To decrease the tension on the rear compartment lid hinge, move the end of the torque rod up a notch.
CAUTION:
To avoid eye and hand injury, always wear safety glasses and gloves when adjusting and/or replacing the rear compartment lid hinge torque rods.
