Beretta V6-173 2.8L (1989)
Compressor Clutch Coil: Service and Repair
Installation
1.
Position replacement coil on compressor, aligning terminals with marks made during removal.
2.
Mount coil installer, puller crossbar and through bolts over coil, ensuring that all components are properly aligned.
3.
Tighten crossbar screw to press coil into position then remove installation tools.
4.
Stake coil to front head in 3 positions, 120 degrees apart, using 1/8 inch punch. Stakings should be approximately 1/2 the size of the punch tip
and .010-.015 inch deep.
5.
Reinstall rotor and bearing, and clutch plate and hub assemblies.
