chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

No MIL Diagnostic Chart A-1 Revision|Page 2917 > < Detonation Sensor|Page 2912
Page 1
background image

Malfunction Indicator Lamp: Technical Service Bulletins
No MIL Diagnostic Chart A-1 Revision

File in Section: 6E - Engine Fuel & Emission

Bulletin No.: 41-65-32

Date: January, 1995

SERVICE MANUAL UPDATE 

Subject:
Section 6E2, 6E3 - Driveability and Emissions - Chart A-1 - No Malfunction indicator Lamp (MIL) "Service Engine Soon"

Models:
1987-94 Passenger Cars and U Vans
with 60 V6 Engine Except DOHC 3AL ("IN X - RPO LQ1)

When following Chart A-1, it is necessary to use a 10 amp fused jumper when providing a ground on the Malfunction Indicator Lamp driver circuit to
illuminate the MIL, instead of a test light. Using a test light may cause both the MIL and test light to illuminate, the MIL to illuminate dim or the MIL
not to illuminate at all.

No MIL Diagnostic Chart A-1 Revision|Page 2917 > < Detonation Sensor|Page 2912