Beretta V6-173 2.8L (1989)
E0100 is the labor operation number used for warranty claims for front tire swaps because of lead/pull or torque steer concerns.
E2020 is the labor operation number used for warranty claims for toe adjust. Correct repair is to reset front wheel individual and sum toe while
locking the steering wheel in correct level position. Do not use E2020 to claim a toe adjust. Remember that a toe adjust will not correct torque steer
or leads/pulls; it only corrects excessive tire wear and steering wheel angle.
10. Do not claim an alignment labor operation in addition to another labor operation that requires (and includes labor time for) an alignment. The labor
time for the alignment is either included in the labor operation or will be added to the labor operation. A good example of this is a strut replacement.
The times for a camber check should be added, but an E2020 should not be claimed in addition to the strut change code.
11. Whenever possible in unusual or difficult-to-resolve cases, keep all defective parts and information for possible Engineering analysis. This includes
defective tires, steering gears, strut mounts, and any other involved parts.
12. Whenever possible, record before and after measurements of caster, camber, toe, and suspension "Z" heights. This will speed up the resolution of
these problems.
