Beretta V6-191 3.1L (1990)
Air Cleaner Fresh Air Duct/Hose: Service and Repair
Air Induction System
CAUTION: When fasteners are removed, always reinstall them in the same location from which they were removed. If a fastener needs to be replaced,
use the correct part number fastener for that application. The correct torque value must be used, as specified, during reassembly to assure proper
retention of all parts, or damage to the part may result.
AIR FILTER ELEMENT
REMOVAL:
1.
Remove the bolts from the air cleaner cover.
2.
Remove the upper portion of the air cleaner assembly.
3.
Inspect the air filter element for dust, dirt, water and clean or replace if required.
INSTALLATION:
1.
Install the air filter element.
2.
Install the upper air cleaner cover.
3.
Install the bolts and tighten to 2.0 Nm (18.0 lb.in).
AIR CLEANER ASSEMBLY
REMOVAL:
1.
Remove the bolt from the air cleaner support bracket to the battery tray.
2.
Remove the clamp from the inter air intake duct.
3.
Remove the inter air duct.
4.
Remove the air cleaner assembly.
