Beretta V6-191 3.1L (1990)
Fig. 65 Standard steering column exploded view (Part 2 of 2). 1989-90 Beretta & Corsica
REMOVE OR DISCONNECT
1. Place lock cylinder (25) in "Off-Lock" position.
2. Dimmer switch assembly (41) and ignition switch assembly (43) as follows:
^
Hexagon nut (40).
^
Washer head screw (39).
^
Dimmer switch (41).
^
Dimmer and ignition switch mounting stud (42).
^
Ignition switch assembly (43) from ignition switch actuator rod (31).
3. Dimmer switch actuator rod (38) from rod cap (22).
IMPORTANT
All fasteners in the following steps must be firmly seated before being tightened to specified torque.
IMPORTANT
Lock cylinder set (25) must be in the "Off-Lock" position when installing ignition switch to insure proper switch slider positioning.
