Beretta V6-3100 3.1L VIN M SFI (1995)
Idle Speed/Throttle Actuator - Electronic: Service and Repair
Throttle Body Assembly
Idle Air Control (IAC) Valve
REMOVE OR DISCONNECT
1. Electrical connector from Idle Air Control (IAC) valve.
2. IAC valve attaching screws.
3. IAC valve assembly.
NOTICE:If IAC valve has been in service: Do Not push or pull on the IAC valve pintle. The force required to move the pintle may damage the
threads on the worm drive. Also, Do Not soak IAC valve in any liquid cleaner or solvent as damage may result.
CLEAN AND INSPECT