Beretta V6-3100 3.1L VIN M SFI (1995)
Intake Air Temperature Sensor: Testing and Inspection
DIAGNOSIS
A Tech 1 scan tool displays temperature of the air entering the engine and should read close to ambient air temperature when engine is cold, and
rise as underhood temperature increases. If the engine has not been run for several hours (overnight) the Intake Air Temperature (IAT) and Engine
Coolant Temperature (ECT) should read close to each other. A failure in the IAT sensor Circuit should set a Diagnostic Trouble Code (DTC) 23 or
25. The DTC charts also contain a "Diagnostic Aid' chart to check for sensor resistance values relative to temperature.
REMOVE OR DISCONNECT
1. Electrical connector.
2. Carefully grasp sensor, with a twisting and pulling motion remove sensor from air intake duct.
INSTALL OR CONNECT
Reverse removal procedure.
