Beretta V6-3100 3.1L VIN M SFI (1995)
Windshield Washer Pump: Customer Interest
Washer Pump - Will Not Prime or Pump Washer Fluid
File In Section: 8 - Chassis/Body Electrical
Bulletin No.: 43-81-34
Date: November, 1994
Subject:
Washer Pump Inoperative - will not Prime or Pump Washer Fluid (Replace Filter Grommet)
Models:
1995 Buick Skylark
1995 Chevrolet Beretta, Corsica
1995 Oldsmobile Achieva
1995 Pontiac Grand Am
Condition
Some owners may comment that the washer pump may not prime or pump washer fluid.
Cause
The filter grommet restricts the flow of washer fluid. As the level of fluid decreases, the pressure of the washer fluid decreases to a point where it does
not flow through the filter grommet.
Correction
A new filter grommet, P/N 22039457, must be installed in order to correct this condition. Refer to Section 8E of the appropriate Service Manual.
1. Remove the pump from the washer bottle.
2. Remove the filter grommet from the pump (see Figure 1).
3. Install a new grommet without filter,
P/N 22039457, in the washer bottle.
