Blazer 2WD V6-4.3L VIN X (2004)
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the fasteners that retain the latch assembly to the door.
Tighten the fasteners to 9 N.m (80 lb in).
4. Connect the power actuator wiring connector, if equipped.
5. Install the outside door handle rod to the latch assembly.
6. Install the inside door handle rod to the latch assembly.
7. Install the inside door lock rod (1) to the latch assembly.
8. Install the water deflector.
9. Install the door trim panel.