Blazer 2WD V6-4.3L VIN X (2004)
Trunk / Liftgate Latch: Service and Repair
Latch Replacement - Lift Gate
Latch Replacement - Lift Gate
Removal Procedure
1. Remove the bellcrank.
2. Disconnect the electrical connectors, as needed.
3. Remove the screws that retain the liftgate latch to the liftgate.
4. Remove the liftgate latch from the liftgate.
Installation Procedure
1. Install the liftgate latch to the liftgate.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the screws that retain the liftgate latch to the liftgate.
Tighten the screws to 9 N.m (80 lb in).
3. Connect the electrical connectors, as needed.
4. Install the bellcrank.
