Blazer 2WD V6-4.3L VIN X (2004)
2. Install the cargo tie down hooks.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the bolts that retain the cargo tie down hooks to the floor.
Tighten the bolts to 35 N.m (26 lb ft).
4. Install the endgate or the liftgate door sill trim plate.
5. Install the jack to the vehicle.
6. Install the body side trim panels, as necessary.
7. Install the rear seat floor filler trim panels.
Carpet Replacement - Rear Panel
Carpet Replacement - Rear Panel
Tools Required
J 38778 Door Trim Pad and Garnish Clip Remover
Removal Procedure
1. Remove the rear window garnish molding.
2. Remove the jack storage cover.
