Blazer 2WD V6-4.3L VIN X (2004)
Trim Panel: Service and Repair
Garnish Molding Replacement - Rear Upper
Garnish Molding Replacement - Rear Upper
Tools Required
J 38778 Door Trim Pad and Garnish Clip Remover
Removal Procedure
1. Use the J 38778 in order to remove the rear header garnish molding.
Insert the J 38778 and work along the front edge of the trim panel from one end to the other.
2. Remove the cargo lamp from the roof rear header garnish molding.
Installation Procedure
1. Install the cargo lamp from the roof to the rear header garnish molding.
2. install the roof rear header garnish molding to the vehicle.
