Blazer 2WD V6-4.3L VIN X (2004)
Trim Panel: Service and Repair
Garnish Molding Replacement - Side Door Lock Pillar (CF5)
Garnish Molding Replacement - Side Door Lock Pillar (CF5)
Removal Procedure
1. Remove the front and rear door sill trim plates.
2. Remove the upper and lower front seat belt anchor bolts.
3. Remove the front side door lock pillar garnish molding from the vehicle. Feed the seat belt through the garnish molding.
Installation Procedure
1. Install the front side door lock pillar garnish molding to the vehicle. Feed the seat belt through the garnish molding.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the upper and the lower front seat belt anchor bolts.
Tighten the screws to 70 N.m (52 lb ft).
3. Install the front and the rear door sill trim plates.