Blazer 2WD V6-4.3L VIN X (2004)
4. Connect the electrical connector (3).
5. Operate the function of the sunroof switch (4).
6. Install the switch into the motor/actuator trim cover (5).
IMPORTANT: Ensure the wires are positioned away from the trim cover attachment screw.
7. Position the cover to the sunroof panel window garnish molding (3).
8. Install the motor/actuator trim cover screw (2).
Tighten
Tighten the screw to 1.5 N.m (13 lb in).
9. Install the motor/actuator service cover.
