Blazer 2WD V6-4.3L VIN X (2004)
Sunroof / Moonroof Track: Service and Repair
SUNROOF WINDOW TRACK ASSEMBLY REPLACEMENT (ZRX/XTREME W/ CF5)
REMOVAL PROCEDURE
1. Remove the sunroof motor/actuator.
2. Remove the long gold assembly screw.
3. Remove the sunroof window.
4. Remove the screws (1) from the window track.
5. Remove the window track assembly from the upper frame assembly.
INSTALLATION PROCEDURE
1. Install the window track assembly (left side) to the upper frame. Let the right side assembly hang.
2. Install the screws (1).
3. Lift the (right side) to the upper frame track.
4. Ensure the drive tubes are positioned into the front end of the window track.
NOTE: Refer to Fastener Notice in Service Precautions.
5. Install the screws.
Tighten
Tighten the screws to 4.0 N.m (35 lb in).